General discussion on installation and configuration of SOGo

Text archives Help


Re: [SOGo] Re-install of Openchange/Sogo fails


Chronological Thread 
  • From: Slávek Banko ( ) < >
  • To:
  • Subject: Re: [SOGo] Re-install of Openchange/Sogo fails
  • Date: Wed, 21 Dec 2016 18:33:05 +0100
  • Dmarc-filter: OpenDMARC Filter v1.2.0 mail.inverse.ca E56371164E03

Hi,

exactly - in the official Inverse repository is now OpenChange only
supported for Ubuntu 16.04 (Xenial). OpenChange packages included in
official Debian 8.x (Jessie) repository are not sufficient for the
current version of SOGo.

However, there is a possibility to use an alternative apt repository. In
this repository is OpenChange available for Debian 7.x (Wheezy), Debian
8.x (Jessie), Ubuntu 14.04 (Trusty) and also Ubuntu 16.04 (Xenial).

See:
https://lists.inverse.ca/sogo/arc/users/2016-07/msg00225.html
https://lists.inverse.ca/sogo/arc/users/2016-07/msg00253.html

However, there is one important piece of information - it seems that
OpenChange is no longer be developed:
https://lists.inverse.ca/sogo/arc/users/2016-12/msg00027.html

Cheers
--
Slávek

Dne st 21. prosince 2016 Christoph Kreutzer napsal(a):
> Hello,
>
> AFAIK openchange is currently only available on Ubuntu (because of some
> dependencies). So your installation can’t be fulfilled on Jessie.
>
> Best regards,
> Christoph
>
> > Am 21.12.2016 um 17:29 schrieb Forum
> > ( )
> > < >:
> >
> > I want to convert my database server from mysql to mariadb.
> > It seems that only way to do this, is to de-install mysql and then
> > install mariadb.
> >
> > However, when I de-install mysql, SOGo/OpenChange is also
> > de-installed.
> >
> > If I re-install SOGo/Openchange per manual, some things go wrong.
> > The manual says:
> >
> > apt-get install openchangeserver \
> > sogo-openchange \
> > openchangeproxy \
> > python-ocsmanager \
> > mysql-server \
> > python-mysqldb \
> > openchange-ocsmanager \
> > openchange-rpcproxy \
> > python-sievelib \
> > python-spyne \
> > python-rpclib
> >
> >
> > If I do however for example
> >
> > apt-get install openchangeserver
> >
> > I get:
> > **************************************
> > apt-get install openchangeserver
> > Reading package lists... Done
> > Building dependency tree
> > Reading state information... Done
> > Some packages could not be installed. This may mean that you have
> > requested an impossible situation or if you are using the unstable
> > distribution that some required packages have not yet been created
> > or been moved out of Incoming.
> > The following information may help to resolve the situation:
> >
> > The following packages have unmet dependencies:
> > openchangeserver : Depends: openchangeproxy but it is not going to be
> > installed
> > E: Unable to correct problems, you have held broken packages.
> > *************************************
> >
> >
> > Trying to install openchangeproxy also fails:
> > **********
> > apt-get install openchangeproxy
> > Reading package lists... Done
> > Building dependency tree
> > Reading state information... Done
> > Some packages could not be installed. This may mean that you have
> > requested an impossible situation or if you are using the unstable
> > distribution that some required packages have not yet been created
> > or been moved out of Incoming.
> > The following information may help to resolve the situation:
> >
> > The following packages have unmet dependencies:
> > openchangeproxy : Depends: samba (>= 2:4.0.0~) but it is not going to
> > be installed
> > Depends: libmapi0 but it is not going to be
> > installed Depends: libmapiproxy0 but it is not going to be installed
> > Depends: samba-libs (>= 2:4.1.13+dfsg) but it is
> > not going to be installed
> > E: Unable to correct problems, you have held broken packages.
> > ****
> >
> > What also fails is
> >
> > apt-get install openchange-ocsmanager
> >
> > This package does not exist at all.
> >
> > Relevant software information:
> >
> > - OS: debian jessie
> > - Samba: 4.2.14-Debian
> >
> > I see that inverse seems to offer Openchange at
> > https://packages.inverse.ca/SOGo/nightly/3/debian/pool/jessie/
> >
> > but it is not clear to me how to use it.
> >
> > My install uses (e.g. for openchangeproxy)
> > ***
> > openchangeproxy:
> > Installed: (none)
> > Candidate: 1:2.2-5+b1
> > Version table:
> > 1:2.2-5+b1 0
> > 500 http://ftp.nl.debian.org/debian/ jessie/main amd64
> > Packages ***
> >
> > Please advice.
> >
> > --
> >
> > https://inverse.ca/sogo/lists



Archive powered by MHonArc 2.6.18.

Top of page